Độ nhám bề mặt thép SKD61 được cải thiện bằng quá trình mài phẳng CNC. Các nhân tố mài phẳng tối ưu được điều tra bằng cách sử dụng phương pháp thực nghiệm Taguchi. Dựa vào kết quả thực nghiệm Taguchi L9 và tỉ số (S/N), các nhân tố mài phẳng tối ưu được xác định: tốc độ quay của đá mài 1600 (vòng/phút), bước tiến ngang bàn máy 5000 (mm/phút), chiều sâu cắt 0,0075 (mm), kiểu đá mài Noritake-355x38x127 #60 WA. Độ nhám bề mặt thép SKD61 được cải thiện từ 0,295 μm đến 0,035 μm tương ứng với 88,1%.The surface roughness of SKD61 steel is enhanced through the implementation of a computer numerical control (CNC) flat grinding method. The optimal flat grinding parameters were identified through the application of the Taguchi method. The optimal flat grinding parameters were determined based on the Taguchi L9 experimental results and the ratio value (S/N). The optimal parameters are as follows: grinding wheel spindle speed of 1600 (rpm), feed rate of 5000 (mm/min), depth of cut of 0,0075 (mm), and grinding wheel material Noritake-355x38x127 #60 WA. The surface roughness of SKD61 steel was improved from 0,295 μm to 0,035 μm, corresponding to an 88.1% reduction.