Catalytic Processes for Production of ?,?-diols from Lignocellulosic Biomass [electronic resource]

 0 Người đánh giá. Xếp hạng trung bình 0

Tác giả:

Ngôn ngữ: eng

Ký hiệu phân loại: 666.9 Masonry adhesives

Thông tin xuất bản: Washington, D.C. : Oak Ridge, Tenn. : United States. Dept. of Energy. Office of Energy Efficiency and Renewable Energy ; Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2018

Mô tả vật lý: Size: 84 p. : , digital, PDF file.

Bộ sưu tập: Metadata

ID: 264326

 In this project, we have demonstrated and developed a multi-step catalytic process for production of 1,5-PDO and 1,6-HDO starting from white birch as shown in Scheme 1. First, lignocellulosic biomass was converted into cellulose, furfural and solid lignin via the TriVersa ProcessTM developed by Glucan Biorenewables LLC. GlucanBio fractionated biomass into a solid high purity stream of cellulose (>
 90% purity and >
 90% recovery) and a concentrated liquid phase of solubilized hemicellulose (>
 90% of hemicellulose solubilized) in Task A (See Table 1). The hemicellulose was then converted into furfural (>
 85% yield) without any purification step. Furfural was converted into 1,5-PDO by four catalytic steps as shown in Scheme 1 in Task B1-3(See Table 1): i) Furfural was hydrogenated into THFA, ii) THFA was dehydrated to dihydropyran (DHP), iii) DHP was hydrated to 2-hydroxytetrahydropyran (2-HY-THP) and 2-HY-THP dimers and 4) 5-hydoxyvaleraldehyde (5-HY-Val) was hydrogenated into 1,5-PDO. This pathway will be referred to in this report as the dehydration, hydration, and hydrogenation (DHH) route. A total yield of >
 80% 1,5-PDO was achieved via this new DHH pathway, which surpasses the >
 50% 1,5-PDO yields over traditional noble catalysts.
Tạo bộ sưu tập với mã QR

THƯ VIỆN - TRƯỜNG ĐẠI HỌC CÔNG NGHỆ TP.HCM

ĐT: (028) 71010608 | Email: tt.thuvien@hutech.edu.vn

Copyright @2024 THƯ VIỆN HUTECH