Highly-Active and Contaminant-Tolerant Cathodes for Durable Solid Oxide Fuel Cells [electronic resource]

 0 Người đánh giá. Xếp hạng trung bình 0

Tác giả:

Ngôn ngữ: eng

Ký hiệu phân loại: 621.312 Generation, modification, storage

Thông tin xuất bản: Oak Ridge, Tenn. : Distributed by the Office of Scientific and Technical Information, U.S. Dept. of Energy, 2020

Mô tả vật lý: Size: 37 p. : , digital, PDF file.

Bộ sưu tập: Metadata

ID: 267910

 The objective of this project is to investigate the fundamental degradation methods occurring in solid oxide fuel cell (SOFC) cathodes when exposed to chromium and carbon dioxide contamination and to rationally design alkaline earth-based catalysts to increase stability and tolerance to contaminate poisoning. With a mechanistic and fundamental understanding of the degradation methods, advanced catalytic surface modifications can be applied to reduce degradation. The specific technical objectives are: (1) To identify/develop new catalysts (alkaline-earth based-) that are compatible chemically with the state-of-the-art cathode materials at high temperatures required for fabrication and with contaminates commonly encountered under operating conditions
  (2) To improve the infiltration process for optimal control of the thickness, composition, and uniformity of the catalyst coatings
  (3) To evaluate the electro-catalytic activity toward ORR of the chemically-stable materials when exposed to different types of contaminants using electrical conductivity relaxation measurements on bar samples and performance evaluation of catalyst-infiltrated cathodes
  (4) To unravel the contamination-tolerant mechanisms of the new catalyst coatings under realistic environmental conditions (with different types of contaminants) using powerful in situ and in operando characterization techniques performed on model cells with thin-film/pattern electrodes, as guided by modeling and simulation
  (5) To establish scientific basis for rational design of new catalysts of high tolerance to contaminants
  (6) To validate the long term stability of modified LSCF cathodes in commercially available cells/stacks under ROC. Alkaline earth-based catalysts have been systematically explored and tested under various contamination conditions. BaCoO<
 sub>
 3-?<
 /sub>
  (BCO) was shown to produce the best catalytic activity enhancement as well as stability in a variety of contaminating conditions, including CO<
 sub>
 2<
 /sub>
  and chromium. The microstructural evolution was investigated with SEM, EDS, and Raman spectroscopy, showing the BCO catalyst prevents the formation of insulating SrCrO<
 sub>
 4<
 /sub>
  by forming electrically conductive BaCrO<
 sub>
 4<
 /sub>
 . Electrochemical relaxation measurements determined the BCO catalyst coatings increased the surface diffusion coefficient but did not significantly affect the diffusion coefficient and determined an optimum surface modification layer of 100 nm. A novel Ba<
 sub>
 0.9<
 /sub>
 Co<
 sub>
 0.7<
 /sub>
 Fe<
 sub>
 0.2<
 /sub>
 Nb<
 sub>
 0.1<
 /sub>
 O<
 sub>
 x<
 /sub>
  (BCFN) catalyst was also shown to have excellent stability in chromium containing atmospheres. A novel surface sol-gel (SSG) surface modification, which offers superior thickness and compositional control, was applied to SOFCs to produce BaO catalyst coatings. SSG BaO coatings were shown to produce conformal coatings on the electrode surface, greatly 4 increasing stability in chromium containing atmospheres. An atomic level mechanistic approach was applied to investigate the stability of PrBa<
 sub>
 0.8<
 /sub>
 Ca<
 sub>
 0.2<
 /sub>
 Co<
 sub>
 2<
 /sub>
 O<
 sub>
 5+?<
 /sub>
  (PBCC) with respect to a variety of common contaminants, demonstrating thermodynamically its superior stability in CO<
 sub>
 2<
 /sub>
  containing atmospheres. Finally, the best catalyst coatings demonstrated in this project, BCO and PBCC, were applied to full cells which demonstrated superior stability for over 300 hours in CO<
 sub>
 2<
 /sub>
  and Cr atmospheres
Tạo bộ sưu tập với mã QR

THƯ VIỆN - TRƯỜNG ĐẠI HỌC CÔNG NGHỆ TP.HCM

ĐT: (028) 71010608 | Email: tt.thuvien@hutech.edu.vn

Copyright @2024 THƯ VIỆN HUTECH