Bài báo này nghiên cứu khả năng chịu xoắn của dầm bê tông cốt thép thường theo một mô hình lý thuyết và một số tiêu chuẩn thiết kế kết cấu bê tông cốt thép và đối chứng với một số kết quả thực nghiệm để đưa ra các khuyến nghị về thiết kế dầm bê tông cốt thép chịu xoắn. Các mô hình tính toán dầm chịu xoắn bao gồm mô hình giàn mềm góc nghiêng thay đổi và một số tiêu chuẩn như TCVN 5574-2018, ACI 318-19 và EC2-04. Các kết quả thực nghiệm được tập hợp từ một số nghiên cứu đã được công bố trước đây. Kết quả chỉ ra rằng các tiêu chuẩn ACI318-19 và EC2-04 dự báo khả năng chịu xoắn với hệ số biến động tương đương nhau, trong khi mô hình dàn mềm dự báo cho hệ số biến động nhỏ hơn khoảng 40% so với các tiêu chuẩn. Hàm lượng cốt thép ngang ảnh hưởng nhiều đến kết quả dự báo theo các tiêu chuẩn. Abstract This paper studies the torsional resistance of normal reinforced concrete beams according to a theoretical model and several design standards of reinforced concrete structures and compares with some experimental results to provide recommendations on the design of reinforced concrete beams under pure torsion. Calculation models of beams in torsion include the rotation-angle softened-truss model and several building codes such as TCVN 5574-2018, ACI 318-19, and EC2-04. The experimental data are gathered from several previously published studies. The results show that the ACI318-19 and EC2-04 building codes predict torsional moment with the same coefficient of variation, while the rotation-angle softened-truss model provides a coefficient of variation about 40% smaller than that of the standards. The ratio of transverse reinforcement greatly affects the prediction results according to the building codes.