Lắp đặt chống sét van (CSV) là giải pháp hiệu quả để giảm suất sự cố (SSC) do sét đánh vào các đường dây truyềntải. Tuy nhiên, giải pháp này cũng có nhược điểm đó là chi phí đầu tư lắp đặt CSV cao, lắp đặt nhiều CSV dẫn tới sự cốtích lũy từ CSV tăng lên, làm tăng SSC đường dây do hỏng hóc từ bản thân CSV. Để giải quyết vấn đề nêu trên, một giảipháp được đề xuất đó là sử dụng CSV kết hợp với treo dây nối đất phía dưới các dây pha (Underbuilt Ground Wire-UGW)trên đường dây truyền tải 220kV, với mục đích vừa giảm SSC của đường dây vừa hạn chế số lượng CSV lắp đặt. Kết quảphân tích đánh giá dựa trên mô hình điện hình học (EGM) và chương trình mô phỏng quá độ điện từ EMTP/ATP. SSCđường dây trong các trường hợp sử dụng biện pháp khác nhau được so sánh và đánh giá. Mối tương quan giữa điện trởtiếp địa cột với SSC được tính toán và phân tích. Năng lượng hấp thụ và dòng điện qua CSV cũng được xác định để làmcơ sở cho việc lựa chọn CSV. Kết quả thu được có thể được sử dụng như một tài liệu tham khảo cho các đơn vị vận hànhtrong việc lựa chọn giải pháp nâng cao khả năng chịu sét cho đường dây truyền tải điện.The use of line surge arrester on transmission lines is a method for the improvement of the lightning performance oftransmission lines. However, this method also has disadvantages such as: the high investment cost and installation manyline surge arresters lead to outage rate of line increase due line surge arrester fault. To address this problem, a newmethod use of line surge arresters coupling with underbuilt ground wire (UGW) to improve the lightning performance for220kV transmission lines, with the purpose of both reduce outage rate and reduce number of line surge arrester. TheResearch results were based on the geometrical electric model (EGM) and the Electromagnetic TransientsProgram/Alternative Transients Program EMTP/ATP. The outage rate of the transmission line in the different use case arecompared and evaluated. The relationship between the tower footing resistance and outage rate were also caculatedand analyzed. The absorbed energy and current of line surge arrester were also identified as the basis for line surgearrester selection. The results obtained can be used as a practical guide for the utilities to improve the lightningperformance for transmission lines.