Bài báo này trình bày các yếu tố ảnh hưởng đến cường độ của vật liệu đắp dạng hạt tái chế từ bùn nạo vét trong TP Hà Nội (Granular Fill Material: GFM). Từ các kết thí nghiệm trong phòng, bài báo khảo sát một số yếu tố ảnh hưởng đến cường độ của vật liệu sau tái chế như: phương pháp trộn
hàm lượng xi măng và polymer
loại xi măng. Trong các thí nghiệm bùn hồ Tây (B) là bùn không độc hại, sau khi nạo vét được tách nước đến độ ẩm trong khoảng [WP
WL], sau đó tiến hành trộn với xi măng (X) và polymer (P). Sản phẩm sau trộn có dạng hạt, tuy nhiên do bùn có độ ẩm lớn nên các hạt vẫn có tính dẻo, dễ dàng trong việc chế bị các mẫu thí nghiệm. Do vậy, để đơn giản trong thí nghiệm mà vẫn đánh giá đúng các yếu tố ảnh hưởng đến cường độ của vật liệu GFM, bài báo lựa chọn thí nghiệm nén một trục nở hông tự do để đánh giá sơ bộ chỉ tiêu cường độ của đất. Các kết quả nghiên cứu cho thấy phương pháp trộn có ảnh hưởng đáng kể đến sự phát triển cường độ của vật liệu GFM. Với cùng cấp phối trộn thì các mẫu trộn (B+X) trước, trộn P sau cho giá trị cường độ cao hơn so với các phương pháp trộn khác. Ngoài ra, giá trị cường độ các mẫu GFM tăng tỷ lệ thuận với hàm lượng xi măng, với hàm lượng nghèo xi măng từ 5% đến 10% thì các mẫu GFM đạt cường độ qu từ 170,8 (kPa) đến 262,05 (kPa) đáp ứng tốt yêu cầu của vật liệu đắp. Đồng thời hàm lượng các chất hoá học trong xi măng như: CaO, SO3, Al2O3 cũng ảnh hưởng đáng kể đến cường độ của vật liệu GFM, các kết quả thí nghiệm cho thấy cường độ của đất tỷ lệ nghịch với hàm lượng CaO và tỷ lệ thuận với hàm lượng Al2O3 và SO3. Từ khóa: Cát nhân tạo
vật liệu đắp dạng hạt (GFM)
các yếu tố ảnh hưởng đến cường độ.This paper presents the factors affecting the strength of recycled granular fill material (GFM) from dredged sludge in Hanoi city. Based on laboratory experiments, the paper investigates some factors affecting the strength of the recycled material such as: mixing method
cement and polymer content
cement type. In the experiments, West Lake sludge (B) is non-toxic sludge, after dredging, it is dewatered to a moisture content in the range [WP
WL], then mixed with cement (X) and polymer (P). The product after mixing is granular, however, due to the high moisture content of the sludge, the particles still have plasticity, which makes it easy to prepare test specimens. Therefore, to simplify the experiment while still accurately assessing the factors affecting the strength of GFM, the paper chooses a free-swelling uniaxial compression test to preliminarily evaluate the strength index of soil. The research results show that the mixing method has a significant effect on the strength development of GFM. With the same mixing ratio, the samples mixed with (B+X) first and P later gave a higher strength value than the other mixing methods. In addition, the strength values of GFM samples increase proportionally with the cement content, with a lean cement content of 5% to 10%, GFM samples achieve a strength of 170.8 (kPa) to 262.05 (kPa), well meeting the requirements of filling materials. At the same time, the content of chemical substances in cement such as CaO, SO3, Al2O3 also significantly affects the strength of GFM, the experimental results show that the strength of soil is inversely proportional to the content of CaO and proportional to the content of Al2O3 and SO3. Keywords: Artificial sand
granular fill material (GFM)
factors affecting strength.