In this study, the small punch test is modelled and simulated by finite element method. Johnson-Cook plasticity model is applied for aluminum alloy A1050-H14. The results obtained from computational simulation are compared to the experimental results in previous study. Then, the parameters of Johnson-Cook plasticity model are chosen for investigated material. It can be proposed the fracture mechanism in the small punch test for aluminum alloy A1050-H14 is ductile fracture. The necking occurs in the area where the specimen is in contact with the edge of the punch at the certain level of displacement of the punch, then the initial crack might appear from outside of the specimen.Trong nghiên cứu này, thí nghiệm dập mẫu nhỏ được mô hình hóa và mô phỏng bằng phương pháp phần tử hữu hạn. Mô hình vật liệu Johnson-Cook được áp dụng cho hợp kim nhôm A1050-H14. Kết quả mô phỏng được so sánh với kết quả thực nghiệm đã được công bố trước đây. Từ đó, lựa chọn được thông số của mô hình Johnson-Cook để thu được kết quả phù hợp cho vật liệu nghiên cứu. Từkết quả nghiên cứu mô phỏng có thể dự đoán cơ chế phá hủy trong mẫu thí nghiệm trong quá trình thí nghiệm dập mẫu nhỏ cho hợp kim nhôm theo cơ chếphá hủy dẻo. Mẫu thí nghiệm sẽ bị thắt tại vùng tiếp xúc với mép chày sau đó phá hủy xảy ra từ mép dưới của mẫu và lan vào phía bên trong.