Thiết kế khí nâng liên tục cho giếng chết và nâng cao năng suất của nó

0 Người đánh giá. Xếp hạng trung bình 0

Tác giả: Ibrahim Rengou Mbouombouo Cherif, Donald Dongmo Eric, Kuiatse Gabriel, Vannela Kamnang Konchipe Hugues, Fleur Matateyou Josephine, Njeudjang Kasi

Ngôn ngữ: Vie

Ký hiệu phân loại:

Thông tin xuất bản: Dầu khí 2022

Mô tả vật lý: 43 - 48

Bộ sưu tập: Metadata

ID: 403840

Thêm vào giỏ Liên kết toàn văn

Thiết kế một hệ thống nâng khí liên tục để kích hoạt giếng chết X và tối ưu hóa việc thu hồi hydrocacbon bằng cách phun khí. Dữ liệu được tính đến là dữ liệu của hồ chứa và giếng. Tất cả các hoạt động mô phỏng và sơ đồ giếng được thực hiện bằng phần mềm PIPESIM 2017 2.0. Hơn nữa, phân tích nút của giếng chết X được thực hiện bằng cách tìm áp suất phun của khí trong giếng. Số lượng van cần lắp đặt, chiều cao phun tối ưu và tốc độ dòng chảy mà mỗi van nhận được cũng được bao gồm trong thiết bị nâng khí. Sau đó, việc đánh giá hiệu suất hệ thống cũng như phân tích độ nhạy được thực hiện để có thể cố định tốc độ sản xuất tối ưu. Kết quả thu được cho thấy rằng đối với một lượng khí phun liên tục 3 triệu ft3 tiêu chuẩn mỗi ngày (MMscf / d) vào mỗi van vào giếng với áp suất đầu giếng là 2.500 psi và tốc độ dòng chảy tối ưu là 2.718 thùng tiêu chuẩn mỗi ngày (STB / d) , lợi nhuận thu được là 182.887.219 USD. Trong lĩnh vực này, thiết kế này có thể được áp dụng cho tất cả các giếng có ống sản xuất đường kính trong 2,5 inch. Mặt khác, các giếng có đường kính khác nhau sẽ yêu cầu đánh giá mới., Tóm tắt tiếng anh, The present paper aims to design a continuous gas-lift system in order to activate the dead well X and optimise the recovery of hydrocarbons by gas injection. The data taken into account are those of the reservoir and the well. All the simulation operations and the well diagram are carried out with the PIPESIM 2017 2.0 software. Moreover, the nodal analysis of the dead well X is carried out by finding the injection pressure of the gas in the well. The number of valves to be installed, the optimal injection heights and the flow rates received by each valve are also included in the gas-lift device. Then the evaluation of the system performance as well as the sensitivity analysis are carried out to make it possible to fix the optimal flow rate of production. The results obtained show that for a continuous gas injection of 3 million standard ft3 per day (MMscf/d) per valve into the well with a wellhead pressure of 2,500 psi and an optimal flow rate of 2,718 standard barrels per day (STB/d), a profitability of USD 182,887,219 is obtained. In this field, this design can be applied to all wells having a production tube of 2.5 inches inside diameter. On the other hand, wells with different diameters will require a new evaluation.

1. Đọc trực tuyến

1. Đọc trực tuyến

Tạo bộ sưu tập với mã QR