Phương pháp thí nghiệm dập mẫu nhỏ được đánh giá là phương pháp thí nghiệm cơ học vật liệu đáng tin cậy, được áp dụng rộng rãi cho các vật liệu kim loại. Trong nghiên cứu này, thí nghiệm dập mẫu nhỏ được thực hiện trên máy thử kéo truyền thống cho các mẫu thử có chiều dày khác nhau làm từ vật liệu thép không gỉ họ austenite SUS304. Chỉ tiêu giới hạn chảy của vật liệu được tính toán từ đường cong quan hệ lực tác dụng - độ võng khi thực hiện thí nghiệm. Từ kết quả tính toán cho thấy, giới hạn chảy tính theo thí nghiệm dập mẫu nhỏ phụ thuộc nhiều vào kích thước mẫu thí nghiệm. Khi chiều dày mẫu thí nghiệm là 0,5mm cho kết quả rất gần với kết quả giới hạn chảy từ thí nghiệm kéo. Trong khi đó, kết quả cho mẫu chiều dày khác có sự sai khác lớn do ảnh hưởng của tỉ lệ giữa kích thước mẫu thí nghiệm và kích thước của đồ gá.The small punch test is considered as a reliable testing method for evaluation of mechanical properties of metal materials. In this study, small punch tests were performed by a conventional tensile testing machine for specimens with different thicknesses made from SUS304 austenitic stainless steel. The yield strength criteria of the material are calculated from the applied force - deflection relationship. From the calculation results, it shows that the yield strength calculated by the small punch test depends considerably on the size of the specimen. When the thickness of specimen is 0.5 mm, the results are very close to the yield strength calculated from the tensile test. Meanwhile, the results for specimens of other thicknesses have large differences due to the influence of the ratio between the size of the specimen and the size of the jig.