In this study, we successfully fabricated transparent conductive electrodes based on copper nanowire using a doctor – blade coating on flexible polyethylene terephthalate substrates. The copper nanowires are synthesized via a simple hydrothermal method with diameters ranging from 25 to 50 nm, and wire lengths can be up to 150 µm. They have dispersed in isopropyl alcohol with a 20 mg/ml concentration, which has potential applications as conductive ink for transparent conductive electrodes. The electrical, optical, and flexibility properties of CuNW TCE are also investigated. CuNW TCE with the optimal number of printing cycles is 4 times. TCE obtained exhibits the sheet resistance, the transmittance at 550 nm, and the figure-of-merit (FOM) value of 40.68 Ω/, 87.3%, and 68.3 Ω-1, respectively. In particular, the sheet resistance remained consistent after 750 bends at a bending angle of 80°. These results demonstrate the potential of CuNW TCE for flexible electrode applications in flexible optoelectronic devices.Trong nghiên cứu này, chúng tôi đã chế tạo thành công điện cực dẫn điện trong suốt (TCE) dựa trên cơ sở dây nano đồng (CuNW) thông qua quy trình in gạt trên đế nhựa linh hoạt polyetylen terephthalate. Trong đó, dây nano đồng được tổng hợp bằng phương pháp thủy nhiệt đơn giản với đường kính trong khoảng từ 25 đến 50 nm và chiều dài có thể lên đến 150 µm. Dây nano được phân tán trong isopropyl alcohol với nồng độ 20 mg/ml dùng làm dung dịch mực in chế tạo điện cực. Đặc tính điện, quang và tính linh hoạt của điện cực dây nano đồng được khảo sát một cách chi tiết. TCE CuNW với số lần in gạt tối ưu là 4 lần. Điện trở bề mặt, độ truyền qua tại bước sóng 550 nm và hệ số chất lượng figure-of-merit – FOM của điện cực tối ưu lần lượt là 40,68 Ω/, 87,3% và 68,3 Ω-1. Đặc biệt, điện trở bề mặt vẫn không thay đổi sau 750 chu kỳ uốn gấp với góc uốn cong là 80°. Kết quả này cho thấy TCE dựa trên dây CuNW có tiềm năng trong việc ứng dụng làm điện cực linh hoạt cho các ứng dụng trong thiết bị quang điện tử linh hoạt.