Doing research on using Eichhomia aassipes as the material in the producing common particleboard process helps multi-materials for producing particleboard and also reduce problems of Eichhomia crassipes that cause the congestion in the circualting in some rivers, cannals in the South of Vietnam. The result confirms that Eichhomia crassipes is a kind of materials non-timber that can adjust some minimal requirements in producing particleboard. Except for technology, equipment and technology to create chips from the usual way, the other factors are applicable regime, mainly technological parameters are the same as particle board commonly produced Specifically, for the 18 mm thick particleboard, density of 0.7 g/cm3, using pressure of 1.65 MPa pressure, pressing temperature 165°C, 15.5 minutes with time pressure, level 13.3 percent glue will obtain quality indicators particleboards from Eichhomia crassipes is: thickness swelling of boards (IS) 8.14 percent, modulus of rupture (MOR) 141.43 KG/cm2 and internal bond strength (IB) 3.56 KG/cm2.