Influence of Process Aids on Solid-Liquid Interfacial Properties of Three-Component Hydroxyl-Terminated Polybutadiene Propellants.

 0 Người đánh giá. Xếp hạng trung bình 0

Tác giả: Zitong Deng, Liping Jiang, Jizhen Li, Qiufan Tang, Huixiang Xu, Wenlong Xu, Xulong Zhang, Qilong Zheng

Ngôn ngữ: eng

Ký hiệu phân loại: 364.24 Influence of personal factors

Thông tin xuất bản: Switzerland : Polymers , 2025

Mô tả vật lý:

Bộ sưu tập: NCBI

ID: 68429

The effect of the process aid "OPS" on the rheological properties of hydroxyl-terminated polybutadiene propellant was investigated by formulating different components of high-solid-content slurry, and the change in slurry viscosity with shear rate, surface morphology of solid-phase particles, and contact angle of the relevant interfaces were characterized. The results showed that the polyalkene polyamine surfactant OPS could significantly reduce the apparent viscosity and enhance the rheological properties of the slurry, to up to a 30% reduction, and the effect was achieved by adjusting the interfacial properties of the aluminum powder and the binder system. With the addition of 0.1% OPS, the contact angle of the interface between the aluminum powder and the binder was obviously reduced, from 97° to 30°, and the wetting was significantly enhanced, so it was judged that the OPS was suitable for HTPB-based composite propellants.
Tạo bộ sưu tập với mã QR

THƯ VIỆN - TRƯỜNG ĐẠI HỌC CÔNG NGHỆ TP.HCM

ĐT: (028) 36225755 | Email: tt.thuvien@hutech.edu.vn

Copyright @2024 THƯ VIỆN HUTECH