As the articles relating to the study of 3D printing processes are picking up pace, the question of comparability and repeatability based on the geometry and size of the specimens arises, based on the fact that the widely used extrusion 3D printing processes inherently have a structure that is made up of extruded lines of various shapes and sizes. This study aimed to determine the impact the specimen geometry and size have on the final tensile strength. One of the most widely used engineering materials, chopped carbon-fiber-reinforced nylon was used for this study. The four main specimen groups examined were specimens containing only walls and specimens containing only infill printed with both a 0.4 mm and 0.8 mm nozzle (to determine that the size of the extrusion lines has any effect on the tensile strength with different specimen sizes) achieving a solid body with two different line structures. Contradictory to the initial expectations, the tests showed that the geometry and size of the specimens had not influenced the tensile strength of the specimens in any of the four specimen groups. However, the tests showed that the groups containing only walls were always stronger than their only-infill counterparts and the groups printed with a 0.4 mm nozzle were stronger than the groups printed with a 0.8 mm nozzle.